Door Handle Replacement
It's worth it to replace door handles if you aren't happy with the way they look, or if they're difficult to use. Installing a new door handle is simple if you have patience.
Modern door handles are usually equipped with cover plates that conceal the screws to give them a more attractive appearance. However, you'll need to attach them separately if your new handle doesn't have them attached already.
Take off the handle from the old one.
The door handle is not only a decoration for your home It's also an important safety feature that lets you to lock and unlock your door. Over time, the door handle may become loose or feel a bit loose. It could be beginning to appear worn out and old. This is a sign that it's probably time for a replacement.
If your door handle is becoming difficult to use, it might be time to replace it. This is a problem because it means you can not lock or unlock your door, which could create the risk of security for you and your family.
Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle could be extremely dangerous, particularly if your children or elderly family members struggle to open it, and get trapped in the. Fortunately, it's fairly easy to fix a broken door handle by replacing the old one.
Most modern door handles are a standard size and so they will fit on any door. If you aren't certain if the new door handle you are buying will work, take out the old one and measure its housing holes. This will let you purchase the correct size door handle.
It is the easiest method to remove the old door handle by taking it off from the door. This is usually done with a screw driver. Some door handles come with an enclosure plate that hides the screws that mount them. You will need to remove the cover plate to gain access to the screws. After you have removed the old handle, take note of the way in which the spindle has been connected. This will assist you in aligning the new handle.
You can also remove the door handle by removing the latch mechanism. Repair My Windows And Doors can use a screwdriver for removing the door handle. However, you will have to locate the tiny latch, which is located on the edge of the trim piece. After you have removed the latch, you can unscrew the handle from the strike plate and then remove the latch away from the door's edge.
Remove the Strike Plate
You'll need to replace your latch plate after replacing the handle. This is the plate that holds the hole where the latch of the door hooks when the door closes. The new handles will have two latch plates that are circular and rectangular plate (see the above diagram that shows the parts of the door handle). If your current latch plate has rectangular, swap it to a round one so that the latch hooks onto the strike plate in a way that makes the handle more comfortable to operate.
The first step is to unhook the screw holding the latch plate. These screws are often tight, and may require some force to loosen. It might be beneficial to get a second person to assist with this part if possible.
The latch plate should easily lift itself out of the door once the screws have been removed. If the latch plate is stuck or refuses to move, use a small file to scrape the edges. This can sometimes free up the plate.
Now you can prepare the new strike plate to be installed. Utilizing the wood screws that came with the new handles, attach the latch plate to the inside of the doorjamb. Be careful not to over-tighten the screws, as this can damage the strike plate.
If you're not sure whether the latch plate is in the correct position You can try closing and then opening the door to check whether it latches and closes correctly. If it doesn't you'll have to adjust the strikeplate up or down, forward or back until the door locks properly.
If the door is still jiggling or moving, you may need to enlarge the hole for latching in the strike plate. This is more prevalent for older doors, but could be due to wear and tear hinge mortises that are too shallow or the wrong size for the latch, or from damage or a broken strike plate. If this is the case, follow the exact procedure to adjust the strike plate, but with an iron file instead of an hammer and chisel.
Removing the Latch
The latch is a curved metal piece which slides in and out of a hole on the inside of your door. When you turn the handle, it pushes this latch forward, allowing you to open the door. It also hooks in a hole on the door frame to ensure that the door is closed. If your door shakes when you close, an upgrade to the latch could be the only thing needed to fix the problem.
The screws that secure the door latch are difficult to locate however, you can use a screwdriver to make a small hole in the trim plate and then pry the latch off. After removal of the trim plate you will be able to pull off the latch and the bolts that hold it, as well as the spindle in position.
If the latch won't come out you can try using an old-fashioned paper clip or tool to free it from the handle mechanism. Insert the item into the slot for the latch that is recessed. gently turn or jiggle it until you feel the handle and latch start to separate. You may need to repeat this several times before the latch is loose enough to pull out.
You should be able to slide the new latch into its slot with no issues once you have removed the old one. Use the new screws to connect the latch to the strike plate or door frame. Make sure that it is correctly positioned in the slot, aligned with the screw chambers.
Check the backset of the current handle (the distance between the centre of the large hole on the front of the door and the edge) before installing the new handle. Check that the latch size of the new handle is in line with the measurement.
You'll require a brand new lock cylinder if you're replacing the handle and latch or if your current one is damaged. If you're not changing locks the new latch will fit in your existing recess and will work with the keys you have currently. Make sure you select a latch with a rectangular cover plate that match your handles.
Remove the cover plate
Door handles can start to look shabby over time, but if you replace them with a modern lever-on-rose design, it's a quick and easy DIY project to decorate and can improve the overall appearance of your home. You can purchase complete sets that include matching escutcheons as well as privacy adaptor kits.
The first step in replacing the door handle inside is to remove the cover plate or rose, which hides the screws and the mechanism within. Use a flathead for removing the cover plate. It may have a slot along one edge or be secured by pins.
After the cover plate is removed take off the screw that holds the interior handle in place, and then set it aside. You'll also want to remove the screws that are holding the latch and plates, which you can do by loosening them with the help of a Philips screwdriver. Then, take the inner plates and latch plate from the door and set them aside.
Some doors don't have this gap. If it doesn't, you'll need to drill a hole into the door to accommodate the new handle. The procedure to do this is the same as for opening a door with a lock, but you'll need to take extra care not to harm the door or frame.
After the holes are drilled after which you'll have to put in new screws for the door knob. Purchase the same dimensions as your old screws to ensure that you don't get the handle that is too loose or tight. You'll also have to install an additional latch plate and strike rod that aren't part of the majority of door handle sets.
If you're in search of a reliable replacement interior door handle set look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit product and has received hundreds five-star reviews. It's a great choice to replace worn or damaged door hardware on your Chevy.